5 Port Gigabit PoE Passthrough Switch PoE Extender Cascade Repeater PoE++ 90W 5 Port(1 PoE in - 4 PoE Out)GigabitPoE Passthrough Switch PoE Extender Cascade Repeater NOTE: 1.This product is a PoE Passthrough Switch, designed to operate by connecting its PoE IN port to a PoE-enabled switch or PoE injector. When connected, it works without the need for an external power adapter. 2. Since most users power this device via PoE, no power adapter is included in the package. If you plan to use the DC input and require PoE output on LAN1-4 ports, please use a compatible DC 48V-57V power adapter with the following specifications: DC port: 5.5mmx2.1mm DC Input Polarity: Positive inside (+), Negative outside (-). Features: The PoE extender/switch does not require local power and is powered via the Uplink port PoE input. Additionally, it supports DC power input: DC 12V-57V, 5.5x2.1mm DC port * Supports PoE++ (802.3bt) power input, with a maximum of 90 watts input, and a total power output of 72 watts for LAN1-LAN4 PoE. Supports PoE+ (802.3at) output on LAN1-LAN4. LAN1-LAN4 Ext mode: Maximum network cable length up to 250 meters, Ethernet speed: 10 Mbps ** LAN1-LAN4 LAN mode: Maximum network cable length up to 100 meters, Ethernet speed: 1000 Mbps Automatically detects and protects PoE equipment from damage. Supports IEEE 802.3af/802.3at/802.3bt (maximum 90 watts) Power over Ethernet (PoE) switch Supports DC 48V-57V passive Power over Ethernet PoE switch Supports DC 48V-57V passive Power over Ethernet PoE injector The PoE extender/switch has 5 10/100/1000 Mbps PoE ports, with the Uplink port for PoE input (compliant with IEEE 802.3bt/802.3at/802.3af) and LAN1-LAN4 ports for PoE output (compliant with IEEE 802.3at/802.3af). All ports comply with 10/100/1000BASE-TX. PoE extenders can increase the transmission distance to 100-250 meters via Cat5E/6E UTP cables. This offers great flexibility in extending PoE distance. ** * When the DC interface input voltage is lower than DC 40V, PoE output on LAN1-LAN4 is disabled. If PoE functionality is required, it is recommended to use a DC 48V-57V power supply. ** Ext mode Note: 1. When Ext mode is enabled, the maximum bandwidth for LAN1-LAN4 network ports is reduced to 10 Mbps per port. Please check your IP camera's bit rate settings. We recommend that the bit rate does not exceed 8 Mbps (8192 Kbps). 2. When Ext mode is enabled, Isolates LAN ports from each other while maintaining uplink access, reducing broadcast storms and improving network stability. Specification Support IEEE 802.3af/at/bt power supply Support DC 5.5x2.1 port input power supply DC Input Power Pin: positive inside (+), negative outside (-) Support non-standard PoE 48-57V power supply Uplink input power supply PoE pins: 1/2(+), 3/6(-), 4/5(+), 7/8(-) LAN1-LAN4 output power supply PoE pins: 1/2(+), 3/6(-) PoE total input power: 90 watts PoE total output power: 72 watts Maximum power output of a single PoE port: 25 watts Transmission distance: 100-250m with Cat5e, Cat6, or higher Ethernet speed: 10/100/1000 Mbps Network management type: Unmanaged Environment: With 6 KV lightning protection isolation International Protection Rating: IP50 Working temperature: -10 to 60 (14 to 140) Storage temperature: -40 to 85 (-40 to 185) Working humidity: 10% to 90% non-condensing Storage humidity: 5% to 95% non-condensing Dimensions: 8cm x 5cm x 2.2cm (3.15inches x 1.97inches x 0.87inches) Product weight: 80g(approximately 2.82 ounces) Item Included: 5-port GigabitPoE Passthrough Switchx1 _x000D_