Features: 1. TPMSFctorysupplierforautomobilefactories 2. Highperformancebatterymodel:CR2032 3. Batterylifespan:2-5years 4. StorageandOperatingtemperature:-40C+125C 5. Signalstrongandstablewon'tdroppingline Description : ItemName: Tire Pressure Monitoring Sensor OENo.: 407004CB0B Other No.:407004CB1B Carmaker: for Nissan,Renault,Infiniti,Venucia Frequency: 433MHz Fitment: for Infiniti QX50 2018/01-2022/05 for Infiniti QX55 2021/08-2022/03 for Nissan Altima 2018/11-2020/06 for Nissan Juke 2019/10-2021/12 for Nissan Kicks 2016/11-2021/03 for Nissan Lannia 2017/10-2024/06 for Nissan Leaf 2018/01-2020/01 for Nissan Qashqai 2016/11-2021/12 for Nissan Sylphy 2017/10-2020/06 for Nissan Sylphy zero emission 2018/08-2021/12 for Nissan Teana 2018/01-2020/12 for Nissan Tiida 2017/11-2020/06 for Nissan X-Trail 2017/05-2022/04 for Renault Espace 2015/01-2020/12 for Renault Kangoo 2019/12-2023/12 for Renault Kadjar 2016/01-2021/05 for Renault Koleos 2016/08-2020/12 for Renault Megane 2021/02-2023/12 for Renault Talisman 2015/01-2017/12 for Renault Zoe 2018/04-2020/12 for Venucia T60 2018/01-2022/12 Attention:Theonlywaytobe100%surethatthepartwillfityourvehicleistocheckyouroriginalpartnumber. Notice:Due to different batches, the printed content on the products may also vary. Installation Process 1. Loosen the tire: Remove the valve cap and core and deflate the tire. 2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 oclock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head. 3. Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve. 4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw. 5. Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.