Name: Electronic Drain Valve Model: 507292 Indicator Lamp: LED indicating power on/off Voltage Range: +/-10% Protection Rating: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Temperature: 90°C Operating Temperature Range: -40°C to 60°C Maximum Current Consumption: 4 mA Power Supply Voltage: 24-240V AC/DC, 50/60 Hz Discharge Time (ON): 0.5–10 seconds Time Interval (OFF): 0.5–45 minutes Widely used in separators, dryers, gas tanks, drip legs, and other compressed air system components Helps clean compressed air system installations Note the direction when installing the valve: do not use hose at outlet, avoid direct air impact Power supply voltage must match drain valve voltage specification For DC power, connect to terminal "1" When wiring the drain valve: brown wire is L (live), blue wire is N (neutral), yellow-green wire is safety ground (GND) Tighten the long screw on the terminal box securely to prevent water ingress Warning: Ensure compressed air system is fully depressurized before installation Ensure power supply is switched off during installation Color: Gold + Black Material: Metal Size: 5 mm Inlet/Outlet Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: Lighting and display differences may cause slight color variation between image and actual item Measurement error allowed: +/- 1-3 cm