Our engine anti-wear protector is carefully prepared from sodium tripolyphosphate and sodium gluconate. _x000D_Designed to reduce wear and corrosion and delay engine components aging. _x000D_How to use is extremely convenient: 1. After replacing the new engine oil, start the engine and keep running at full speed for 5 minutes to ensure that the engine reaches warm-up state, and then turn off the engine. _x000D_2. Pour a whole can of anti-wear protective agent into the oil tank and run at a total speed for at least 15 minutes to allow it to mix thoroughly. _x000D_3. For 6-cylinder engines, it is recommended to add a can of anti-wear protection agent, or add this product at 5% of the total oil. _x000D_4. It is recommended to add anti-wear protection agent every 12,000-15,000 km and use it with new engine oil to ensure the best results. _x000D_And the friction coefficient can be optimized, and the engine efficiency and power output can be improved._x000D__x000D_Net content: 100ml _x000D__x000D_Product name: Engine anti-wear protective agent _x000D__x000D_Keywords: Auto Care _x000D__x000D_Gross weight: 120g _x000D__x000D_Ingredients: Sodium tripolyphosphate, sodium gluconate _x000D__x000D_Packaging size: 12*3.9*3.9cm _x000D__x000D_Product size: 11.8*3.7cm _x000D__x000D_Box meter: 56*36*21.5cm _x000D__x000D_Weight of one box: 17.750kg _x000D__x000D_Shelf life: 3 years _x000D__x000D_Storage method: Please store it in a cool and covered area Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-YJL official store