1、2 IN 1 DESIGN: Combining DC power supply and multimeter, providing high performance and high work efficiency. The output power is 300W, the output voltage is 0‑60V, and the output current is 0‑5A. Equipped with a USB charging port that supports SCPI and can charge devices. 2、MULTIMETER FUNCTION: This device not only serves as a laboratory power supply, but can also serve as a 4 1/2 bit multimeter. Easily measure voltage, current, capacitance, resistance, continuity, with diode testing. The 2.8 inch LCD display provides high resolution (10mV/1mA), making it easy to use. 3、CIRCUIT GUARD FUNCTION: Independent output on and off button control ensures circuit guard. Support setting overvoltage and overcurrent values. When the actual current exceeds the preset current value, the power supply automatically switches to the CC mode guard circuit. 4、WIDE COMPATIBILITY: The combination of power supply and multimeter simplifies workflow and reduces the need for multiple independent devices. 2.8 inch TFT LCD screen provides clear measurement data. USB comm interface enhances compatibility with different device and system. 5、APPLICABLE FIELDS: Suitable for laboratories, electronic maintenance, DIY projects, comm equipment maintenance, production lines, scientific and educational institutions, as well as mobile phone and laptop maintenance, PCB aging testing, battery charging experiments, etc. Item Type: 2 in 1 Power Supply and Multimeter Interface: USB, supports SCPI protocol Model: SPM6053 Channel: Single Channel Output Total Power Output: 300W Constant Power Output Power Supply Output: 0-60V, 0-5A Interface: USB Device, USB Host (5V1A output only) Operating Temperature: 0-40℃ Display Type: 2.8 Inch (240x320) Color LCD Display Size: Approx. 82 x 142 x 226mm / 3.2 x 5.6 x 8.9in Power Supply Parameter: Rated Output(0℃-40℃): 0-60V, 5A, 300W Load Regulation Rate: ≤30mV, ≤20mA Power Regulation Rate: ≤30mV, ≤20mA Setting Resolution: 10mV, 1mA Readback Resolution: 10mV, 1mA Setting Accuracy (Within 12 Months 25℃±5℃): ≤0.1% ± 20mV, ≤0.1% ± 10mA Readback Accuracy (25℃±5℃): ≤0.1% ± 20mV, ≤0.1% ± 10mA Ripple and Noise: ≤50mVp-p, ≤5mVrms, ≤30mAp-p Maximum Bit: 4 1/2 Bit Automatic Range DCV: 200.00mV: ±(0.3%±10digit), 2.0000V, 20.000V, 200.00V, 1000V: ±(0.3%±5digit) ACV: 200.00mV, 2.0000V, 20.000V, 200.00V: ±(0.8%±10digit), 750V: ±(1%±10digit) Current: DCA: 200.00mA:±(0.8%±10digit), 10.000A: ±(2.5%±10digit) ACA: 200.00mA:±(1%±10digit), 10.000A: ±(2.8%±10digit) Resistance: 200.00Ω, 2.0000kΩ, 20.000kΩ, 200.00kΩ, 2.0000MΩ: ±(0.8%±10digit), 20.000MΩ: ±(1%±3digit) Capacitance: 20.000nF, 200.00nF, 2.0000uF, 20.000uF, 200.00uF, 2.0000mF: ±(3.0%±10digit) Transient Recovery Time (50-100 Percent Rated Load): ≤1.0ms Storage: 4 Sets Data Storage Features: 1. 2 In 1 Function: Combine the power and multimeter functions into one device, simplifying your workflow and reducing the need for multiple separate devices. 2. Portable and User Friendly Design: Its thin body design makes it easy to carry and easy to use, perfect for professional use and DIY enthusiasts. 3. High Resolution TFT Display: Equipped with 2.8 inch TFT LCD display, providing clear, vivid and easy to read measurement data, providing a better user experience. 4. USB Comm Interface: SCPI comm protocol is supported through the USB interface to enhance its compatibility with different devices and system. 1 x Power Supply Multimeter 1 x Testing Wire 1 x Power Cable 1 x Ground Wire 1 x Fuse 2 x Multimeter Pen 2 x User Manual