10A 12V 24V LCD Display Digital Temperature Controller Regulator Thermocouple Thermostat Sensor With NTC-10K B3950 Probe Cable 1.Description: It is a digital temperature controller module.LCD display, very clear, easy to use, powerful.It can be widely used at Smart home,Industrial control,Automatic irrigation,Indoor ventilation.Protection equipment. 2.Features: 1>.LCD display; 2>.Power-down memory function; 3>.Emergency stop function; 4>.Real-time display temperature; 5>.Automatically save parameters; 6>.Support UART Set; 7>.Support Heating and Cooling work mode; 8>.High temperature buzzer alarm; 9>.Work status indicator; 10>.Independent of parameters; 11>.With case, beautiful and practical; 12>.High precision; 13>.Multiple parameters are displayed simultaneously. 3.Parameters: 1>.Product Name:Digital Temperature Controller 2>.Product Number:XY-WT01 3>.Working Voltage:DC 6V-30V 4>.Control Load Current:10A(Max) 5>.LCD refresh rate:0.5 second 6>.Temperature Sensor:NTC-10K B3950 7>.Test temperature: -50~110℃ 8>.Control precision:0.1℃ 9>.Sensor length: 0.5 meter 10>.Sensor probe specifications:4*30mm Stainless steel 11>.Physical dimension:79*44*26mm 12>.Operating Humidity:5%~95%RH 4.Work Mode: 1>.’ H ’: Heating mode. Relay will turn ON and the heating device starts to work when Current Temperature Value is less than Setting Temperature Value - Return Temperature Value. Relay will turn OFF and the heating device stops to work when Current Temperature Value is more than Setting Temperature Value. 2>.’ C ’: Cooling mode. Relay will turn ON and the cooling device starts to work when Current Temperature Value is more than Setting Temperature Value + Return Temperature Value. Relay will turn OFF and the cooling device stops to work when Current Temperature Value is less than Setting Temperature Value. 3>.’ OPH ’: ON/OFF delayed start. The system starts timing 'T' when a normal heating or cooling operation is completed.The system will begin the next round of heating or cooling only after 'T'>'OPH'. 4>.’ OFE ’: Temperature correction function(-10.0~10.0℃). If the module works for a long time, there may be deviations. Corrected by this function. Actual Temperature Value = Current Temperature Value + Calibration Value. 5>.’ ALA ’: Set high temperature alarm.