Specification: Attention: Using Time: approx 1 minute (will automatically power off in order to protect the machine, can be used again after cooling) With CE/220V/Plug/English Manual/LED Light Voltage: 220V AC 60Hz Wattage: 1100W Plug AU/ UK/US/EU(optional) It will be shipped that depend on your delivery location. If you have specific requestion,please contact with me when you place an order. Operating Temperature: -40 C ~ 60 C Relative Humidity: <95% RH Atmospheric Pressure: 86KPa~10KPa Illumination: LED Light Model Number:kIA-1KW Certificate:CE(EMC,LVD),UL,CCC,Available for COC,POVC Induction Coil:Diameter*Quantity:30mm*2(PCS),40mm*2(PCS),50mm*2(PCS),Spare Wire*2(PCS) Heating Bolt Diameter:5-40mm Heater Dimension:36CM*6.8Cm*6.8CM Applications: 1. Preheat become attached or rusted fasteners and parts that need to be separate 2. Straighten small hail and other similar dents without painting paint layer without breaking the car, Removal of Strip on auto body parts when you restore or straightening. 3. Burning silent blocks, pressed on beams running gear or other machinery and equipment. 4. Heat treatment of metal parts, hardening, tempering, normalizing. 5. Pressing bearings on a hot landing, as well as flowability. 6. Snyatie small laminated glass sealants for metal. 7. Removing glued on painted metal spoilers, moldings, stickers. 8. The heating of the surface of the hood or other surfaces to be coated vinyl. 9. Removing rust from metal and car body by high-speed heating parts, and flaking rust. 10. Removing paint coating to a metal surface or body cars. Safety Rules 1.Read manual carefully before using. 2.Keep your work area clean. 3.Do not overreach, keep proper footing and balance at all times, proper footing and balance enables better control. 4.Do not use in moist surroundings or immerse it in water to electrical shock hazard and machine damage. The advantage of using this device is it is totally flameless,comparing with traditional way lf heating by fire,it is much safer and of higher work efficiency,without the worry of harming the adjacent area,Light weight do not deed water cooling,and very easy to use This device adopt Electro-Magnetic induction theory,can fast heat small metal parts on auto or machines, Mainly used for heating Rusted/Frozen/Corrosive Bolt,Nut,Fasteners,Suspension Nut,Gears,Pulley,and Bearings etc,Meanwhile,it also can help removing stickers on cars. Heating Abilities:In around 30 seconds,it can heat a 20mm dimeter bolt to a temperature above 300, maximum temperature can reach around 750 Features: 1.An induction heater is a key piece of equipment used in all forms of induction heating. 2.The inductor is a hand-held one with slip-resist ergonomic housing. Faster and safer than traditional torch. 3. Collateral damage normally associated with torches can also be eliminated. 4.A bright LED light exists to light up your work load. Package included: 1 x Magnetic Induction Heater 6 x Coils 2 x spare lines(can change shape) 1 x Manual 1 x Tool Box