Walksnail Avatar HD Kit V2 5.8Ghz Digital System FPV Transmitter 32GB 22ms Low Latency 1080P HD 160 Day Vision Camera With Gyroflow for RC Drone Precise details: Feature: -Optimized antenna base design and frequency button position for greater convenience -The only native 4:3 high-definition sensor in the FPV industry -Updated the design of the PCB board and outer shell -The spare pad provides two power connection modes -2K pixel, 120fps, 4:3 native sensor -20*20mm mounting holes -160 wide-angle FOV -F/2.0 Large Aperture -32g built-in storage -Supports Gyroflow -1080P 120fps HD FPV -Lightweight design -GPS anti-jamming -22ms low latency -Ranging Mode -4KM range -6V-25.2V Specification:-Camera Model:Avatar V2 camera Image Sensor:1/3.2-Inch 4Mp 4:3sensor Resolution:1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility; Min.Illumination:0.001Lux Dimensions:19*19*22mm Coaxial Cable:140mm Shutter:Rolling shutter Ratio:4:3 native /16:9 Lens:2.1mm FOV:160 Aperture:F2.0 Weight:7.2g Coaxial Cable:140mm Gyroflow:supported -VTX Model:Avatar V2 module Communication Frequency:5.725-5.850GHz Transmitter Power (EIRP):FCC:1/O Interface JST1.0*4(Power in)JST0.8*6(USB) Mounting Holes:25.5*25.5mm; 20*20mm Dimensions:33.5*33.5*10.5mm Storage:32GB Recording:1080p/720p Weight:17.6g Operating Temperature:-20-40 Channels:8 Wide Power Input:6V-25.2V Supported FC System:Betaflight; Inav; Fettec; ArduPilot; OSD:Canvas mode Latency:Average delay22ms Antenna:1(IPEX) -Avatar V2 antenna Polarization:LHCP Bandwidth:5600MHz-6000MHz Gain:1.9dBi VSWR:1.5 Input Impedance:50 Interface:IPEX-1 Size:R15 X 45mm without cable Weight:2g Recommend Part: (Not Included) Package Included: 1x Walksnail Avatar HD VTX V2 - 32GB w/ Gyro 1x Walksnail Avatar HD Camera V2 1x Walksnail Avatar Antenna V2 1x USB transfer extension cable 4x M2*5*0.5mm gasket 1x 4 Pin silicone cable 4x M2*14mm screws 8x M2*4mm screws 4x M2*5mm screws 4x M2*6mm screws