OEM LCD Screen with Digitizer Full Assembly Before Installation Notes Tips 1: Test before installation. When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself with an ESD (electrostatic discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your fingers on glass splinters. Tips 2: Simulate testing. Screen replacement is a very fragile product. We strongly suggest testing before installation. Please simulate testing, which means taking the mobile phone apart (motherboard + LCD or screen), connecting the audio cable and new replacement, powering on, and testing. If the test is successful, please proceed with installation. If the screen does not display, please contact us immediately. Do not force it to be installed in the mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable. Please make sure LCD cable is not over-bent. Bending over 90 degrees may cause a black display. About the product 1. LCD display + touch screen digitizer assembly replacement part. 2. Replace the old, broken, cracked, or damaged screen. 3. Make your device look refreshed. 4. Fully compatible and functional. 5. Each item has been inspected and is in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Note: Due to lighting and screen setting differences, the item's color may be slightly different from the pictures. Please allow slight dimensional differences due to manual measurement.