This film is made of high-quality raw materials. Film advantages: Compared with other films, it has lighter release force, better light transmission (95%), smoother surface, higher surface quality, and longer service life. These features directly benefit your printing process, making demolding easier and quieter. Higher UV light transmittance results in smoother and more detailed prints. How to use Tension: This film is compatible with all desktop resin 3D printers using a stretch film tray structure and common screw snap design. The tension of the film on the build tray affects the demolding effect. Adjust the film tension according to the center size of your tray, ensuring it is neither too loose nor too tight. For optimal results, fine-tune the setup based on your specific printer model. Service life and replacement: Service life may vary due to differences in print format, resin type, usage frequency, layer height, and individual handling. Replace the film when the surface becomes severely scratched or loses elasticity. Compatible models: ANYCUBIC PHOTON, EZ3DX X-5 X-6, KLD-LCD1268-A1, makex m-jewelry m-one, MICROMAKE, MINIQ, MouldX, nova3d, SPARKMAKER, Uniz Slash, X-CUBE, XMAKE, Marriott Duplicator 7, EO Mars, LONGER Orange Color: Transparent Material: FEP Size: 140x200x0.1mm Package Contents: 5 x FEP Film Sheets Note: Lighting and display differences may cause slight color variations between the image and the actual item. Measurement error is +/- 1-3 cm.