1. Onboard mature and stable ESP-12F WIFI module, capacity 4M FLASH2. The I/O port of the WIFI module and the UART download port are all led out to facilitate secondary development3. Onboard AC-DC switching power supply module, power supply mode supports AC90-250V/DC7-30V/5v4. Onboard WIFI module reset button. ESP-12F supports the use of development tools such as / IDE, and provides for Reference in the development environment5. Onboard 4 5V relays, output switch signal, suitable for controlling the working voltage of AC Load within 250V/DC 30V. On-board power indicator, 1 programmable LED and relay indicator.Burning port:The GND, , TX, and 5V of ESP8266 are respectively connected to the GND, TX, , of the external TTL serial port module5V, IO0 needs to be connected to GND when downloading, and then disconnect the connection between IO0 and GND after downloading;Relay output:NC: Normally closed, the relay is short-connected with it is closed, and it is suspended after being closed;: public end;NO: Normally open end, the relay is suspended being closed, and shorted to after being closed.colour:GreenMaterial:PCBsize:87 x 93mmPackage Contents:1 x ESP8266 4 Channel Relay ModuleOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.