Battery Saving Technology: This device turns on and stays in standby mode completely automatically, without the need to turn on a special button or every time you reconnect. Thanks to the use of special technology, you can leave the device connected to the OBD2 connector of your car without damaging the battery. Characteristics: Supports 12V/24V vehicles that comply with the OBD2 protocol standard, as long as the APP you use supports your vehicle model. Automatic switching HS CAN / MS CAN. Support All OBD2 Protocols The OBD2 connector requires up to 4128 bytes to communicate with big data. The buffer size of this interface is 8192 bytes. Data transfer speed up to 3 Mbit Support Ford FEPS 18V programming signal (18V on OBDII leg 13) USB 2.0 Programs used for this adapter: All programs that work with ELS27 / ELM327 adapters ELS27 Baudrate A program for setting the speed and operating mode of the ELS27 adapter, the selected configuration is saved inside the adapter. FORScan Program for diagnosing Ford, Mazda, Lincoln and Mercury cars. ELMConfig A program for diagnosing, flashing and configuring units of Ford Focus 2, C-MAX mk1, Kuga mk1, Mondeo 4, S-Max, Galaxy cars. Designed to change the configuration and open hidden functions. FoCCCus A program for tuning a Ford Focus 3, and also partially for platform mates for electronic parts Fiesta 7 and Kuga 2. STool Program for adjusting odometers. ELM-FFn Program for working with Ford Fusion and Ford Fiesta cars.