Description An efficient machine can facilitate your outdoor work, reduce your workload, and increase your productivity. Featuring a 1300-watt motor, this concrete vibrator is suitable for curing cement and removing all air bubbles to give you the toughest cement possible. It also makes the surface of the concrete flat, preventing cracks and defects from appearing after the concrete has cured. Application It is widely used in commercial concrete, bridges, port construction, large dams, hydroelectric power plants, transportation, water conservancy, port, mine and metallurgy, high-rise building foundation pouring piles, dense steel mesh concrete walls and large, medium and small construction projects, patching and other repair jobs, etc. Specifications Model: 35-1 Material: Nylon, Steel Wire, Rubber, Copper Style: Handheld Concrete Vibrator Color: Yellow Power Source: Corded Electric Motor Type: Pure Copper Motor Plug: EU Standard Power: 1300W Actual Power: About 1000W Speed: 4300RPM Plug Voltage: 220V 50/60HZ Power Cord Length: 2m/6.6ft Vibrating Rod Size(L*D): 2m*35mm/6.6ft*1.3inch Package Size: 72*11*33cm/28.35*4.33*12.99in Gross Weight: 6.9kg/15.21lbs Package Included 1* Concrete Vibrator 1* Vibrating Rod Details Heat Dissipation Holes: The product is designed with multiple holes on both sides, which can ensure that the motor can dissipate heat for a long time, prevent burns, and prolong the life of the motor. Threaded Connection: The high-precision threaded connection makes the vibrating rod lock firmly with the main unit and is not easy to fall off. Notes 1.Before running the concrete vibrator, you should check whether the power cord connection is correct and put on insulated gloves (not included). After the power is turned on, if the concrete vibrator does not produce vibration, you can generally knock the end of the concrete vibrating rod to the ground, and after the vibrator makes a smooth and powerful chirping sound, you can carry out the pounding operation. 2.When a vibrating rod works, it should be inserted vertically or inclined into the soil, pounding vibration after some time can be. The vibration of the vibrating rod should be up and down pumping. The vibrating rod should not be bent more than 60°. 3.After working continuously for half an hour, the vibrating rod should stop for a while to prevent the machinery from heating too much and damaging the machine parts. 4.After using it for some time, the vibrating rod should be checked to see if the threaded connection of the rod head is loose to prevent the mortar water from penetrating the rod, causing the vibrating rod not to vibrate. 5.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.