Name: Electronic Drain Valve Model: 507292 Indicator Lamp: LED indicating power on/off Voltage Range: 10% Protection Rating: IP65 Insulation Class: H Maximum Working Pressure: 1.6 MPa Maximum Temperature: 90C Operating Temperature Range: -40C to 60C Maximum Current Consumption: 4 mA Power Supply Voltage: 24240V AC/DC, 50/60 Hz Discharge Time (ON): 0.510 seconds Time Interval (OFF): 0.545 minutes Widely used in separators, dryers, gas tanks, drip legs, and other compressed air system components Helps clean compressed air system installations Note the direction when installing the valve: do not use a hose at the outlet that cannot withstand air impact Power supply voltage must match the drain valve voltage requirement When using DC, the positive pole must be connected to terminal "1" When the drain valve is connected to cable: Brown wire is L (live), blue wire is N (neutral), yellow-green wire is safety ground (GND) Tighten the long screw on the terminal box securely to prevent water ingress Warning: When installing the electronic drain valve, ensure that: Compressed air system is fully depressurized (no pressure) Power supply is switched off Color: Gold + Black Material: Metal Flow Size: 5 mm Inlet/Outlet Port Size: 1/2 inch Package Contents: 1 x Electronic Drain Valve Note: Other items not included Note: Lighting and display differences may cause slight color variation between image and actual item Measurement error allowance: 13 cm